BBC 632cu. Alum. engine

[bordsmnj]

marine endurance motor,1000 hp
brand new never assembled
most machine work has been done.
Tall deck brodix block, extra thick steel sleeves(gen4) , big lifter bore(.937)
block is bored to 4.56( for 621cu. on the first set of rings/bore) set for 10.2:1 compresion.
the pistons (flat tops)were custom made by CP.
Oliver billet steel rods 6.635"
Lunati Billet Pro crank 4.75" polished and ready to go
balancing was done by Balance Research
machining was done at Shaver racing.
Calico bearings
Brodix(sunny's) -4 extra cnc heads
Felpro MLS head gaskets #1077
Brodix(sunny's) SA2020 single plane intake, ported/gasket matched.
Barry Grant stage 4 dominator carb 1290 cfm
Donovan gear drive timing set w/billet cnc adjustment access cover
Bullet Racing solid roller cam .700" lift
T&D shaft mounted rocker arms 1.7ratio
Crower lifters 66291X937H-16 ,severe duty rollers BBC cutaway .937 od w/ hi presure pin oiling
Trick Mmarine two piece polished valve covers with breathers(kit)
Steph's offshore race pan
Hay's billet steel fly wheel
Ati super damper
$21,000

it was cammed with the thought of running all day at 6500 rpm @ +/-1000hp in front of an outdrive. low idle,torque everywhere. probably 200 lbs lighter than a blower motor making the same power.

if you have any Q's i'll try to answer as best i can. thanks for looking -Jason
714-791-1383 lv msg

[BradP]

Will you take an IOU?:rolleyes:

[RiverRacer]

That would make a nice sleeper deal for sure!..:cool:

[gfinishline]

That parts list is worth quite a bit more than the asking price. I put together a 602" Dart steel, Eagle rotating, and the parts cost over $19K. Lunati crank, Oliver rods, aluminum block, shaft rockers, put this deal OVER $26K in parts alone. "Nice deal"

[bordsmnj]

i still have this thing and want it gone. the new price is $15,999.99obo. the catch is i want to keep the valve covers, shaft rockers and timing set.i'm flexible with this part as well as the fact that the oil pan is usles for a v-driver. help me dump this thin so i can build my GN boat!:Dthanks for reading this -Jason B.

[RiverRacer]

I can't believe you haven't sold it yet, that's a heck of a deal!... What are you building for a GN boat???..

[bordsmnj]

that same 19 schiada that's been upside down in my garage for a year now. the trailer's about done. pulled off that project to finish another one. wife's rule is i have to have at least one boat that runs....i can live with it,lol. -jas
it's the orange boat here:
http://www.performanceboats.com/html/forums/showthread.php?t=13665

[RiverRacer]

Oh ok, didn't know you still had that boat!.. At least one boat that runs huh, that's a pretty good rule!.LOL..:D

[motormonkey]

Do you have setup pics of the 711 boat and bump for a nice motor.

[bordsmnj]

nothing with dimensionscuase i was extremely care ful not to lose set up when i took it apart. in other words all the turn buckles came off the boat still attached. just pulled the pins at the plate. entire over ride pedal came out in one piece to measure or whatever in the future. i do however have about a hundred photos of all the rigging taken during tear down so i can put it back close plus a few up grades. anything specific your looking for? let me know -Jas

ps- if you have a 19' schaida i'd be real interested to see pics of yours as well. thankyou:D

http://i146.photobucket.com/albums/r246/bordsmnj/schiada002.jpg

http://i146.photobucket.com/albums/r246/bordsmnj/schiada001.jpg

[bordsmnj]

the motor is sold! to the man with the DiMarco v-drive.:D

[RiverRacer]

Congrats on the sale!..:cool:

[steveo143]

Gonna turn this into a twin turbo efi beast.

[bordsmnj]

Congrats on the sale!..:cool:

thankyou. i now no longer have an excuse not to get busy on the v-drive project.Steve isn't kidding when he says beast efi.:D -Jas

[RiverRacer]

Gonna turn this into a twin turbo efi beast.

Cool, what's it going in!..:cool:

[RiverRacer]

thankyou. i now no longer have an excuse not to get busy on the v-drive project.

That's right, and we want updates and progress pics!..;):D

[motormonkey]

Thanks for posting pics and congrats on the sale. I have a 19 hallet . I remember that boat for sale and liked it. Keep us updated on the progress.

[bordsmnj]

10-4. gotta finish the trailer so i can send it off to the glass shop.i might have some time to get after it next week.maybe even thursday. -Jas

[steveo143]

Cool, what's it going in!..:cool:

DiMarco 21.

[RiverRacer]

DiMarco 21.

That should move it right along!..