What is it?

[TonkaDriver]

First person to correctly identify the object in the picture gets a beer or soda from my cooler at the Sept gathering on the river.

Kurt

http://i220.photobucket.com/albums/dd67/tonkadriver/Misc/junk002.jpg

[Wannabe]

Well DUH!!!

That would be the excess resin left over in the bottom of the cup. Only seen about three hundred of those.

[TonkaDriver]

I was hoping Art would come across with a guess something like A Petrified Turd From A Ditch Pump. I will put some Mountain Dew in the cooler just for the Miller clan.

Very short thread I guess. I was coating the plywood for the deck on the unofficial V-Drive.com camera platform and it was a warm day. I put the right amount of catalyst in and halfway thru the quart I mixed that is what happened. In a second it stopped pouring. Was like a super-ball for a bit. Bounced everywhere.

Kurt

[FC-Pilot]

Yes, a change in temp and or humidity can have a big affect on how fast that stuff goes off. We also learned that having it out in direct sunlight can be detrimental also. I don't even want to admit how many times we have done that. I do have to say, if not for our unique experiences we would not have had any idea. Anyway, we are looking forward to seeing you at the river Kurt.

Paul

[058]

It didn't catch on fire? Hot day, catalized resin.....fire in the hole!

[Wannabe]

I love it when it catches on fire, or better yet, when it gets so hot it melts the container. You can tell when you have a good containter when it stis there and boils the edges against the container while the center turns into a rock. Gotta love it.

[Terrible toy]

Looks familiar...

For all the probs that resin gives ya, I think acetone in cuts when you're washing the stuff is off is worse.:eek:

[FC-Pilot]

Looks familiar...

For all the probs that resin gives ya, I think acetone in cuts when you're washing the stuff is off is worse.:eek:

Thank you for reminding me why I love doing fiberglass work (aside from the itching).:D

Paul

[BradP]

I love it when it catches on fire, or better yet, when it gets so hot it melts the container. You can tell when you have a good containter when it stis there and boils the edges against the container while the center turns into a rock. Gotta love it.

Ever use Zoops Seal for AL?

I mixed my first batch in a red plastic cup in the kitchen, on the granite.
Went outside and when I came back in there was a bright red puddle on the counter and running down the maple cabinets.:eek::eek:


Cleaned up nicely thank God.:D

[BradP]

First person to correctly identify the object in the picture gets a beer or soda from my cooler at the Sept gathering on the river.

Kurt

http://i220.photobucket.com/albums/dd67/tonkadriver/Misc/junk002.jpg


I was thinking maybe a West Hollywood butt plug.:eek::eek::p

[RiverRacer]

I was thinking maybe a West Hollywood butt plug.:eek::p

LMAO!..:D:D

[RiverRacer]

A Petrified Turd From A Ditch Pump.

Now that is some funny shit there, I love it!..:D



Very short thread I guess. I was coating the plywood for the deck on the unofficial V-Drive.com camera platform and it was a warm day. I put the right amount of catalyst in and halfway thru the quart I mixed that is what happened. In a second it stopped pouring. Was like a super-ball for a bit. Bounced everywhere.

That's because you DIDN'T put the right amount of catalyst for the weather conditions, don't feel bad any time I do that stuff it either fires off before I can use it, or it never fires off at all so FK it I don't do that stuff anymore!,LOL..:D

[FC-Pilot]

I was thinking maybe a West Hollywood butt plug.:eek::eek:

What site do you think you are on?;):D

Paul

[BradP]

What site do you think you are on?;):D

Paul


Sorry, went a little Hot Boat there for a minute.:p:D

[TonkaDriver]

That's because you DIDN'T put the right amount of catalyst for the weather conditions, don't feel bad any time I do that stuff it either fires off before I can use it, or it never fires off at all so FK it I don't do that stuff anymore!,LOL..:D

OK Art, so I'm not a chemist. I was doing it in the shade of the shop. But then it is just the cheap Home Dump resin so I will just blame it on that and keep my ego intact.....lol

[BradP]

That's one reason I like the West Marine epoxy system.
No guess work and they have different catalysts for different temp ranges.

[RiverRacer]

OK Art, so I'm not a chemist. I was doing it in the shade of the shop. But then it is just the cheap Home Dump resin so I will just blame it on that and keep my ego intact.....lol

Good excuse as any I guess, LOL...:D

[RiverRacer]

That's one reason I like the West Marine epoxy system.
No guess work and they have different catalysts for different temp ranges.

Don't mean $hit if I'm doing it, LOL..:D

[father nostalgia]

it looks like someone put in fiberglass resin in a cup and way too much cataylist.