Selling what's Left of my Sanger.......

[77brendella]

1. Aluminum fuel tank 48"x9" w/brackets holds 12 gal. $100.00

2. Steering set up (doesn't include quadrant, it has some cracks) all pulleys Hall Craft, chain, column assy 32" long., steering wheel 14" $100.00 THIS ITEM IS SOLD !!!

3. Stock Harmonic balancer for int. bal. 427BBC $25.00

4. 1 1/8" Stellings prop 11.5 dia.x15 pitch small cup & 1 small chip $200.00

5. 1 1/8" x 67" Prop shaft, straight $100.00

6. Balancer cover chrome, fits up to 8.5" balancer $45.00

7. Bronze shaft log for 1 1/8" shaft measures 3.75" wide x 12" long $35.00

8. Steel Strut for 1 1/8" shaft, 15" long barrel, new bushings, 4" x 7 7/8" mount plate $150.00

9. Prop shaft whirl a way for 1 1/8" shaft and 1" v-drive shaft, can be used for L or R rotation $225.00 THIS ITEM IS SOLD !!!!!!!!!!!

10. Bronze Rudder 1" shaft 9 3/4" long blade is 13" long x 5 1/2" @ bottom & is back set needs to be rechromed or stripped to show quality, Aero Marine brace included $100.00

11. 427BBC SFI flex plate like new $30.00

12. Team "G" intake single 4150 carb. flange rectangle port, has been clear coated will clean up nice $150.00

13. Aluminum BBC valve covers plain, used but nice condition $65.00

14. Chrome Moroso BBC valve covers, good test covers $20.00

15. PTO flange for 1350 u-joints fits BBC $25.00 THIS ITEM IS SOLD !!!!!!!!

16. Drive shaft like new Built by Advanced Driveline in Orlando, Fl. This is one Strong Shaft, will fit from 19 1/2" to 22 1/2" application $175.00 THIS ITEM IS SOLD !!!!!!!!!!!!!

17. Offset t-stat housing for blower/super charger application, used 1 season in fresh only $60.00

18. Bronze Hall Craft 9* strut, very nice, very clean, 7 5/8" x 4 3/8" mount plate, 9" barrel w/ 1" shaft hole $125.00

19. Stellings gas peddle assy. w/stringer mount bracket works well $60.00 THIS ITEM IS SOLD !!!!!!!!!!!!!!

20. 427 BBC Steel Crank in Great shape $325.00

21. Casale 1.09% 12* gear set left hand $150.00

22. Casale 1.12% 10* gear set left hand, 2 teeth are chipped but good enough gears for a test set $40.00

23. Aluminum velocity stack for 4150 carb.5" tall, has screen $20.00

24. Edelbrock engine plates for v-drive, rear one has been welded but needs to be redone and pollished both are 25" wide, pair for $250.00

25. Chrome shaft coupler in good shape 1" to 1 1/8", 4 3/4" long $35.00

I can take pics and send them to you if you are interrested in any or all of the parts listed.
Too many pics to post on here and don't have too much extra time these days. Let me know, John:);)

All prices are negociable and do not include shipping


I will be going to the event @ Lake Kerr at the end of June, if you are serious about anything forsale and are also going, drop me a line and I can bring the parts with me to save you shipping costs.

Thanks, John 407-375-8895 jmackey41@yahoo.com

[RiverRacer]

Could you post some pics of these please!..

Aluminum BBC valve covers plain, used but nice condition $65.00

Chrome Moroso BBC valve covers, good test covers $20.00

[dmontzsta]

Shot you a PM for one item.

The one Art called dibs on, I want to snake it from under him! lol.

j/k :)

[dry]

I sent a PM on the whirlaway prop release........

[RiverRacer]

Shot you a PM for one item.

The one Art called dibs on, I want to snake it from under him! lol.

j/k :)

Great first post there chief!.. :p

Oh, and welcome Don!.. :D

[dmontzsta]

Great first post there chief!.. :p

Oh, and welcome Don!.. :D

Thanks, I did not know this place went down and my post count as well. :)

[FC-Pilot]

Thanks, I did not know this place went down and my post count as well. :)

I would not worry, you only lost about five or six posts anyway.:p:D

It is good to see you here.

Paul

[dmontzsta]

I would not worry, you only lost about five or six posts anyway.:p:D

It is good to see you here.

Paul

ouch. :) true, true...

[RiverRacer]

Thanks, I did not know this place went down and my post count as well. :)

Dude, you need to get with the program and be up on things!..:D

[steveo143]

I'm interested in #9. Is it an Algon shaft release? If so I will buy it.

[SnoC653]

Could you post pics of the steering set up, and what do you mean by it has cracks? Are you refering to the wheel itself or do the pullies and mounts have cracks? Also could you post a picture of the whirl-away. Does it fit the newer split case or the older top loaders. And which way is it set up to release now?

Thanks

[77brendella]

:D

Hre are some pics

[77brendella]

Here are more pics and still more to come:)

[77brendella]

Enjoy, enjoy, enjoy!!!!!!!!!!
Hope they are all coming out o.k.:p

[77brendella]

I found more parts that I need to get out of the garage. I guess you might call it Spring Cleaning for HOT BOATERS !!!!!!!
1. The nitros kit is brand new but is missing a solenoid and the pills for the carb plate. But the plate, lines and all of the rest including a mounting bracket to mount the bottle to the stringer is all included for $325.00
2. The BG 400 pump includes the single/2-sided filter. You can hook 1 or 2 lines coming off of the filter depending what you need. It is currently in a boat but we are going to the high dollar mechanical pump so we won't need this one. This pump works very well for Drag Racing when you have a tunnel ram or a blower w/2 carbs. all for $350.00
3. The air shifter comes complete with bottle w/guage, bracket, linkage, lever, lock out plate, ram, hose, all you need to have an air shifter in your boat for only $300.00

ALL PARTS SOLD AS IS AND DO NOT INCLUDE SHIPPING.:):)

[77brendella]

Could you post some pics of these please!..

Aluminum BBC valve covers plain, used but nice condition $65.00

Chrome Moroso BBC valve covers, good test covers $20.00

http://www.v-driveboat.com/vweb/attachment.php?attachmentid=353&d=1211415152

HERE'S ONE OF THE MOROSO COVERS.
I HAVE TO TAKE ONE OF THE PLAIN COVERS STILL.:cool::cool:

[77brendella]

Could you post some pics of these please!..

Aluminum BBC valve covers plain, used but nice condition $65.00

Chrome Moroso BBC valve covers, good test covers $20.00

Here is a couple of pics of the aluminum covers. They need to hit the polishing wheel to get a few marrs out from sitting around. Thy have a little overspray on one end each, I think the box end was open in the shop when one of the projects were getting a Make Over!!!
They will clean up nice though..:):)

[RiverRacer]

Here is a couple of pics of the aluminum covers. They need to hit the polishing wheel to get a few marrs out from sitting around. Thy have a little overspray on one end each, I think the box end was open in the shop when one of the projects were getting a Make Over!!!
They will clean up nice though..:):)

Thanks for the pics I appreciate it, was hoping they were different but they are the same as I have now!.. Thanks anyhow!... Art..

[77brendella]

Could you post pics of the steering set up, and what do you mean by it has cracks? Are you refering to the wheel itself or do the pullies and mounts have cracks? Also could you post a picture of the whirl-away. Does it fit the newer split case or the older top loaders. And which way is it set up to release now?

Thanks


If you read the ad it says (2. Steering set up (doesn't include quadrant, it has some cracks) all pulleys Hall Craft, chain, column assy 32" long., steering wheel 14" $100.00)
Meaning that only the quadrant that hooks to the rudder shaft is cracked and I have thrown it out but all of the rest of the parts to the steereing system are there and in good working condition.
As for the Shaft release, it is sold.
Thanks

[SnoC653]

If you read the ad it says (2. Steering set up (doesn't include quadrant, it has some cracks) all pulleys Hall Craft, chain, column assy 32" long., steering wheel 14" $100.00)
Meaning that only the quadrant that hooks to the rudder shaft is cracked and I have thrown it out but all of the rest of the parts to the steereing system are there and in good working condition.
As for the Shaft release, it is sold.
Thanks

That is what I hoped you were saying, but I wanted to be sure. Any thoughts on cost of shipping the steering set up to 52632? It would definately work for the old stevens. Should polish up pretty well or powder coat. So if shipping is reasonable I'll definately take it.

[77brendella]

That is what I hoped you were saying, but I wanted to be sure. Any thoughts on cost of shipping the steering set up to 52632? It would definately work for the old stevens. Should polish up pretty well or powder coat. So if shipping is reasonable I'll definately take it.



It will cost yu in the neighborhood of $20.00 for shipping give or take.
I will give an exact price if you agree to purchase and I fit it in a box and weigh it.
Thanks, John:):)

[Retired Flatbottom Racer]

Message sent on Item 21

[156]

http://i233.photobucket.com/albums/ee81/156champ/scan0001-5-1.jpgsent you a pm regarding the fuel tank

[motormonkey]

Sent a pm on the steel strut.

[tboats52]

:D

Hre are some pics


Is the torque tube drive shaft cover still available? Please pm me. Thanks, Tom

[taylor73]

10. Bronze Rudder is this a wedge style rudder?