Parts And Hull For Sale. [Archive]

George1301

05-13-2008, 08:29 PM

Sorry to hear of "hard times"...
I could use your alternator if you are willing to drop that to $65.00....?
Kinda on a shoestring budget...I don't think my Eba "special" is working... :(
Noticed you are located in So. Cal....?
I am in Ontario / Elsinore area
Thoughts..?

GR8WHITE

05-13-2008, 08:33 PM

and some more!

oops here are the last ones

GR8WHITE

05-13-2008, 08:36 PM

GR8WHITE

05-14-2008, 01:35 AM

and three more!!!

RiverRacer

05-14-2008, 04:03 AM

This is a Neovane pump and a Hallcraft T!..:D I'd buy it but I already have two of them!..

http://www.v-driveboat.com/vweb/attachment.php?attachmentid=292&d=1210704892

hm66Howard

05-14-2008, 06:00 AM

Man, that is a bummer! :(

GR8WHITE

05-15-2008, 02:43 AM

whats the hallcraft piece called art?

hoskinson

05-15-2008, 05:12 AM

Hi, I just phoned my old crew mgr in Ny (near Tim) & told him about your hull, maybe it will get a new home like Kurts Shark

sic syndicate

05-15-2008, 11:58 AM

Hey Gr8white, sorry to hear of your situation. I'm very interested in seeing your parts and purchasing what i need for my syndicate resto, i've started pulling it appart to verify component conditions etc. Please p.m. me with your contact info. so i can see it soon, i'm interested in the headers, scoop, watter pump etc. thanks, sic-o

GR8WHITE

05-15-2008, 06:06 PM

Hi, I just phoned my old crew mgr in Ny (near Tim) & told him about your hull, maybe it will get a new home like Kurts Shark

ok cool thanks, i have never sold anything big like a boat on ebay but if it doesnt sell soon i might just put it on there to see what i can get for it. once again thanks for the phone call, i really dont want to strip the boat down anymore than it is because as of now all it needs is an engine. i could start stripping out the v-drive, pedals, gas tanks, seats, engine plates, driveshaft, driveshaft tube, and throttle pedal but then that leaves a huge project for someone to finish.

GR8WHITE

05-18-2008, 12:08 AM

well guys everything was put on ebay on tuesday, so if you are interested in something go ahead and bid on it my user id on ebay is GR8WHITEGR8.

poncho

05-19-2008, 12:30 AM

GR8,you're post made me very sad i absolutely wish the best for you and remember the next one will be even better

warpt71

05-23-2008, 10:55 PM

I have a buddy lookin but he is lookin for a complete boat, less motor. Have all the "extra" parts sold yet? IE motor plates, timing cover, water pump oil pan and headers?

AquaCraft

05-23-2008, 11:09 PM

I have a buddy lookin but he is lookin for a complete boat, less motor. Have all the "extra" parts sold yet? IE motor plates, timing cover, water pump oil pan and headers?

Here is a '66 AquaCraft up your way for $1450 less engine that might interest your buddy. No affiliation.

http://slo.craigslist.org/boa/688109491.html

warpt71

05-23-2008, 11:18 PM

Maybe??? He really wants a Hondo like mine. Should have never let him drive it :D :D :D

AquaCraft

05-24-2008, 01:16 AM

Maybe??? He really wants a Hondo like mine. Should have never let him drive it :D :D :D

Then this Hondo w/o motor might be the one for him! Help me, I just discovered how easy it is to search v-drive boats on Craig's list and it's addicting. 'So many boats, so little room/time/money...

No affiliation.

http://inlandempire.craigslist.org/boa/687451626.html

warpt71

05-24-2008, 01:23 AM

Wow thats nice!!! He can't have it though, Its nicer than mine lol :D

It would be real nece if you could search all of CA though and not city by city, unless Im missing something?

Flatmvn

05-24-2008, 02:19 AM

I went and looked at the Hondo in Phoenix, it is not as nice as the pictures, need way more work than you can see. Gell is shot, rudder and stuffing box shot, lots of unpluged holes in the stringers. The only thing I saw worth having was the stack tank and the Polished Casale. I have pics of it if you would like them.

Louis

warpt71

05-24-2008, 03:13 AM

Huh, well whada ya know lol Could the guy have been talked down in price???

You can sent the pictures to warpt71@hotmail.com Thats the same hull as mine, I always like looking at others!

Flatmvn

05-24-2008, 03:40 AM

If you are going to talk him down I would start about $1500.00 and stick with it.

Louis

warpt71

05-24-2008, 03:45 AM

Thats what I was thinking. Phoenix is a bit far for us though. Glad you gave us the heads up!

AquaCraft

05-24-2008, 03:58 AM

...you are right re: the Craigs List search, city by city...

GR8WHITE

05-26-2008, 06:28 PM

well guys the engine sold on ebay but not the boat so i really really need some dough, so i will let it go for 1500.00 cash in hand takes it.
here is my # 661-839-8821 my name is justin. i am leaving havasu in a couple of hours to head home so call me after 5pm and my days off are sunday and monday.

warpt71

05-26-2008, 06:35 PM

Do you still have the motor accessories??? Make it easy to drop in a motor and go, that would definatly help

lebel409

05-27-2008, 05:29 PM

Just a few words about the Lebel...since it's not common or well known.

Very well built, takes a set, was competitive with B boats in drags although the width of the boat at the drivers seat was an aerodynamic disadvantage.

Distinctive transom, very shallow V (just over an inch in 3 feet), 4 full length stringers of spruce.

He's selling this for the cost of 1/2 the hardware...and the boat is worth at least as much.

If I had the cash (or the space) I'd be all over it.

FWIW.

GR8WHITE

05-27-2008, 08:29 PM

Do you still have the motor accessories??? Make it easy to drop in a motor and go, that would definatly help

no sorry i dont, thats why i dropped the price to 1500.00 like i said i have alot of guys trying to get me to sell the v-drive out of the boat for like 900.00 but as it sits right now someone could get it going for not alot of coin, if i rip out the v-drive, the fuel tanks and other stuff i can get almost 1500.00 for everything but i dont want to pull everything out.

warpt71

05-27-2008, 09:01 PM

Bummer, I probably could have had a buyer for it. You haved a cool hull there w/ real potential. Sorry you have to sell it

GR8WHITE

05-28-2008, 07:59 PM

I think you could use another project hull wink wink. :D

warpt71

05-28-2008, 08:08 PM

HAHAHAHAHA I don't think so! Im tryin' yo move (again). If my buddy were to buy it though it would kinda be my project :D :D :D

GR8WHITE

05-29-2008, 12:37 AM

ck_73

05-29-2008, 01:45 AM

Hey Gr8, this is Warpt's buddy. What kind of shape is the boat in. And would it be possible to go check it out this Saturday, 5/31?

GR8WHITE

05-29-2008, 02:25 AM

I work on saturdays unfortunately but not on sundays and mondays, i will be home from work around 5pm i believe on this saturday. i work in valencia if you want you can meet me here and follow me home. so give me a jingle ck then i can tell you everything without my fingers falling off.

RiverRacer

05-29-2008, 03:59 AM

this is Warpt's buddy.

So sorry to hear that, hope you recover soon!..:D:D

BTW, welcome aboard!.:cool:

warpt71

05-29-2008, 04:04 AM

So sorry to hear that, hope you recover soon!..:D:D

BTW, welcome aboard!.:cool:

Hey now!!!!

He wanted to drive the boat, you know that there is no recovering once you ave driven your first flat! You become addicted for life :D

Looks like we're taking a drive saturday night

RiverRacer

05-29-2008, 04:13 AM

Hey now!!!!

He wanted to drive the boat, you know that there is no recovering once you ave driven your first flat! You become addicted for life :D

Looks like we're taking a drive saturday night

Very true!..:D

hotrod56cars

06-04-2008, 05:18 PM

well if i dont get a buyer in the next week or so ( i hate to do this) but does anyone need two bucket seats, two fuel tanks, nicson gas pedal w/linkage, split case casale v-drive, driveshaft and safety tube, up/down pedals for the cav. plate with the rod and springs, two blade prop, or any of the steering stuff, bow gauge pods. if i dont get a buyer all this stuff will be for sale and the trailer will be turned into a car trailer and the bare hull well i dont know, SO SOMEBODY PLEASE KEEP ME FROM DOING THIS PLEASE. WARPT??????:o

I'm just starting to poke around looking for a v-drive and probably going to sell my jet boat. I saw this on Lebel Craigslist a couple of days ago and I sent the ad to my email addy so when I was ready I could give you call and see if it was still available. We may be able to work something out. I'm new to v-drives and know little about them so I wouldn't want one that's missing a whole lot of parts, especially v-drive specific parts. However I won't need the seats, gas tanks, or a throttle pedal. Not trying to dismantle your boat but I can tell you if I get your boat it won't be dismantled and parted out, it would be getting wet again. Let me know how flexible you are on the sale. Thanks, Rod.

GR8WHITE

06-04-2008, 06:19 PM

sent you a pm rod :D

hotrod56cars

06-04-2008, 06:59 PM

PM'ed you back. :D

SnoC653

06-04-2008, 09:24 PM

Did you get this sold? Sure does seem like a nice project to wind up parting out and throwing the hull away. It's really a shame it won't just fit in a big box, so you could mail it to me.

GR8WHITE

06-04-2008, 09:31 PM

Unfortunately not, i really wont junk it. after i sell everything lebel409 will take the hull with all cavitatation hardware, maybe the up/down plate and driveshaft tube and driveshaft for a small price with no trailer because i cant and wont bring myself to chop this thing up and throw it in the dump. i will put it out in the street for free before i do that.:( i wish it would just fit in a box so i could ship it to ya. you know how things work out as soon as i am done with this whole escapade someone will call me and say "hey i have cash in hand and i wanna buy the boat" cause thats how it always happens.

hotrod56cars

06-05-2008, 04:45 AM

Thanks anyway GR8WHITE.

RiverRacer

06-05-2008, 04:54 AM

Thanks anyway GR8WHITE.

If you're looking for a "good" 100mph boat, I know of 3 that are available!...

shooter2

06-05-2008, 05:01 AM

If you're looking for a "good" 100mph boat, I know of 3 that are available!...

If you bought all three does that make one 300 mph boat???? LOL, sorry bored tonight.

brian

RiverRacer

06-05-2008, 05:05 AM

If you bought all three does that make one 300 mph boat???? LOL, sorry bored tonight.

brian

That's funny, LOL..:D

shooter2

06-05-2008, 05:10 AM

If you bought all 3 you would be a wealthy dumb a$$.

Brian

warpt71

06-05-2008, 05:13 AM

And he would still be a smart a$$

RiverRacer

06-05-2008, 05:16 AM

Very true, LOL..

hotrod56cars

06-05-2008, 04:32 PM

If you're looking for a "good" 100mph boat, I know of 3 that are available!...

I'm not ready to buy, I still need to sell my jet boat which I'm not ready to do. The 468 will be done in a week so I'm thinking that I might as well put it on the water. I'm in a "researching stage" on v-drives and stumbled on this site and thread.

A friend of mine has a very ugly flat bottom Sanger (paint), it's solid with a good floor and stringers, and he's offereing it to me on a trade for storing a boat on my property for a year. It would be complete minus engine, seats, and fuel tanks. I would get the Sanger when this season is over. ? .

GR8WHITE

06-06-2008, 01:16 AM

I'm not ready to buy, I still need to sell my jet boat which I'm not ready to do. The 468 will be done in a week so I'm thinking that I might as well put it on the water. I'm in a "researching stage" on v-drives and stumbled on this site and thread.

A friend of mine has a very ugly flat bottom Sanger (paint), it's solid with a good floor and stringers, and he's offereing it to me on a trade for storing a boat on my property for a year. It would be complete minus engine, seats, and fuel tanks. I would get the Sanger when this season is over. ? .

Well im selling dual fuel tanks and seats if you are interested.

hotrod56cars

06-06-2008, 01:42 AM

Well im selling dual fuel tanks and seats if you are interested.

I have those already, thanks. Does that Jones tach work and is it mechanical?

GR8WHITE

06-06-2008, 01:47 AM

I have those already, thanks. Does that Jones tach work and is it mechanical?

Brad and i hooked it up and he hooked a screw gun up to the cable and for some reason to us it does not work.

RiverRacer

06-06-2008, 03:22 AM

Brad and i hooked it up and he hooked a screw gun up to the cable and for some reason to us it does not work.

Did you spin it fast enough!..:rolleyes::D

hotrod56cars

06-06-2008, 07:17 AM

Did you spin it fast enough!..:rolleyes::D

IMO The needle should "jump" even if it was being spun too slow.

Thanks GR8WHITE.

RiverRacer

06-06-2008, 03:02 PM

IMO The needle should "jump" even if it was being spun too slow.

Thanks GR8WHITE.

Not necessarily, depends on the ratio and what rpm it starts!..

hotrod56cars

06-06-2008, 03:58 PM

Not necessarily, depends on the ratio and what rpm it starts!..

Good point. :p

GR8WHITE

06-06-2008, 08:23 PM

well lets just say when i got it, the tach or any meter on the boat for that fact was not hooked up. the cable was tucked away under the bow. but brad said the square looking pin at the end of the cable was in good condition, so maybe the tach is messed up internally or maybe it works i dont know, i have never owned one.