Throttle cable

[onlyone]

Art the cable on the Daytona is what, Rex has 2 hold downs in their catalogue. do you know which one is the proper part # . I can not find a # on the cable so do not know what to order.................Thanks ..........:confused:.....Rick

[RiverRacer]

Art the cable on the Daytona is what, Rex has 2 hold downs in their catalogue. do you know which one is the proper part # . I can not find a # on the cable so do not know what to order.................Thanks ..........:confused:.....Rick

Rick, it's just a plain everyday 33C cable, any marine place will have a bracket, or just make one!..;)

[Fooshizn1x]

I wouldnt say any marine place will have one... I had a hell of a time going through the exact same thing this past weekend. I have a push cable with a Demon 850 Carb... the standard type brackets would not work with a push setup. Eventually a neighbor remembered that he had the same setup on his Dragoncraft which was currently out of comission and lent me his bracket to use. I also traced it and plan to make a few more possibly.

The biggest problem I had was that I have a double pumper and all the pull style brackets if turned backwards would hit the accelerator pump.

I included a pic of the one I used... I put arrows pointing to the two areas that are close to the accelerator pump that caused problems with other brackets. If you need dimensions I can probably do that..

[RiverRacer]

I wouldnt say any marine place will have one... I had a hell of a time going through the exact same thing this past weekend. I have a push cable with a Demon 850 Carb... the standard type brackets would not work with a push setup. Eventually a neighbor remembered that he had the same setup on his Dragoncraft which was currently out of comission and lent me his bracket to use. I also traced it and plan to make a few more possibly.

The biggest problem I had was that I have a double pumper and all the pull style brackets if turned backwards would hit the accelerator pump.

I included a pic of the one I used... I put arrows pointing to the two areas that are close to the accelerator pump that caused problems with other brackets. If you need dimensions I can probably do that..

It's Morse-Teleflex it's common stuff available anywhere, those clamps have been around for ever!.. The plate is up to you to make it fit!..;)

http://img236.imageshack.us/img236/1518/plate1ys4.jpg

[gfinishline]

Please look at GLENWOOD'S catalog! You will find what you need at reasonable prices!

[flatbroke]

I made a bracket for my throttle cable using the original engine lifting bracket as a pattern. It allows the cable a straight shot at the carb without having to bend the cable. It is just a piece of aluminum plate and didn't take long to make. It also prevents the extra plate under the carb and that mounting tab sticking into the area of the T/Stat housing.

http://i31.photobucket.com/albums/c375/flatbroke-1/throttlelinkage1.jpg

http://i31.photobucket.com/albums/c375/flatbroke-1/throttlelinkage2.jpg

[AquaCraft]

Here is a 33C bracket I made from scrap aluminum angle for a throttle cable set-up that "pulls". 'Very similar to Flatbroke's set-up except it's off the other end of the engine in a 'cracker-box.http://www.v-driveboat.com/vweb/attachment.php?attachmentid=281&stc=1&d=1210389399

[RiverRacer]

Almost endless ways it can be done, just some thought and a little creativity!..

[jerkizoid]

Look in your Jegs cataloge if you want a trick billet adjustable set up with spring and all for 70.

[onlyone]

Thanks guys , sorry for the late reply %$#@*&&& putier but have a bracket already but just needed to know what clamp I needed and have now. Thanks again , its realy hard to post so have a good one...........:cool:....... Art...... see ya in Burly.... looking forward to seeing all..................:D..........Rick

[RiverRacer]

Art...... see ya in Burly.... looking forward to seeing all..................:D..........Rick

See ya there Rick!... Art..